Hello Guest it is March 28, 2024, 09:41:28 AM

Author Topic: Homing Procedure  (Read 1212 times)

0 Members and 1 Guest are viewing this topic.

Homing Procedure
« on: March 27, 2022, 02:25:22 PM »
Hello all,

I am using the Pokeys57 cnc ethernet controller with Windows 10.

I do not use home switches.  I would like to disable the auto homing procedure, this way when I press the "ref all home" button the software will set the current machine coordinates as home/zero.

I have set this up in the past to work this way, but that computer crashed in a bad way and I can no longer recall how I had configured the system.

Offline Azalin

*
  •  181 181
    • View Profile
Re: Homing Procedure
« Reply #1 on: March 27, 2022, 03:06:28 PM »
If you are using Mach4 then this should work.

Re: Homing Procedure
« Reply #2 on: March 27, 2022, 03:29:08 PM »
If you are using Mach4 then this should work.

I am using mach 3