Hello Guest it is March 28, 2024, 03:32:00 PM

Author Topic: pwm ess laser frequency question  (Read 585 times)

0 Members and 1 Guest are viewing this topic.

pwm ess laser frequency question
« on: February 25, 2022, 10:44:14 PM »
Hello,
        i've install a laser atomstack m50 on my cnc, the controller is an ess. It is hoocked up to a pwn pin that is setup in the ess plugin configuration. When i put the laser to 100%, it is a lot less powerfull then when i press the test button on the laser driver it self. What am i missing, is the pwn frequency have an impact to the power of the laser?
Thanks

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: pwm ess laser frequency question
« Reply #1 on: February 27, 2022, 02:29:53 AM »
For those that follow, this question was answered by Andy on the Warp9 forum;  https://www.warp9td.com/index.php/kunena/7-general-discussion/9135-ess-with-m50-atomstack-laser-module-and-mach4

Tweakie.
PEACE
Re: pwm ess laser frequency question
« Reply #2 on: February 28, 2022, 04:02:55 PM »
Yes Tweakie.CNC thanks,
                                    only need to update ess plugin to the latest.