Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: smallpoul on February 25, 2022, 10:44:14 PM

Title: pwm ess laser frequency question
Post by: smallpoul on February 25, 2022, 10:44:14 PM

Hello,
        i've install a laser atomstack m50 on my cnc, the controller is an ess. It is hoocked up to a pwn pin that is setup in the ess plugin configuration. When i put the laser to 100%, it is a lot less powerfull then when i press the test button on the laser driver it self. What am i missing, is the pwn frequency have an impact to the power of the laser?
Thanks

Title: Re: pwm ess laser frequency question
Post by: Tweakie.CNC on February 27, 2022, 02:29:53 AM

For those that follow, this question was answered by Andy on the Warp9 forum;  https://www.warp9td.com/index.php/kunena/7-general-discussion/9135-ess-with-m50-atomstack-laser-module-and-mach4

Tweakie.

Title: Re: pwm ess laser frequency question
Post by: smallpoul on February 28, 2022, 04:02:55 PM

Yes Tweakie.CNC thanks,
                                    only need to update ess plugin to the latest.