Hello Guest it is February 15, 2026, 11:14:02 AM
Profile Guest
« previous next »
Pages: « 1 2   Go Down

Author Topic: Steppers run one direction only for all Axis......  (Read 35140 times)

0 Members and 1 Guest are viewing this topic.

Offline gldfshrdr

*
  • 40 40
Re: Steppers run one direction only for all Axis......
« Reply #10 on: January 28, 2022, 04:19:46 PM »
Yes I did. It didn't fix the problem and the motors would not run.

thanks......dt
Logged

Offline TPS

*
  • 2,623 2,623
Re: Steppers run one direction only for all Axis......
« Reply #11 on: January 29, 2022, 01:50:50 AM »
have you checke motor wires with ohmmeter

A+/A-  and B+/B- should have the same resistance.
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Pages: « 1 2   Go Up
« previous next »