Hello Guest it is June 25, 2024, 04:59:43 PM

Author Topic: Wanting to upgrade mach 3 to a newer version  (Read 9836 times)

0 Members and 1 Guest are viewing this topic.

Offline Jackal

*
  •  171 171
Wanting to upgrade mach 3 to a newer version
« on: October 14, 2021, 08:57:55 PM »
My mill is using an older ( licensed) version of mach 3.
It seems that it's  around a 2010-2011  year edition. At the time of my retrofit, it was the latest edition.
It the past there was a few problems where the spindle wouldn't  reverse in auto tapping, etc.
What would be the latest upgrade that some of you would recommend?
Right  now I don't have the info on the computer that is running the system.
 That can be provided tomorrow if necessary.
Thanks in advance.

Jack
Everything is bio-degradable if you run over it enough with a lawnmower.

Offline Jackal

*
  •  171 171
Re: Wanting to upgrade mach 3 to a newer version
« Reply #1 on: October 16, 2021, 01:16:33 AM »
Any ideas where I can download a  newer version? Not necessarily  the newest, maybe something around 2013???
Everything is bio-degradable if you run over it enough with a lawnmower.

Offline Tweakie.CNC

*
  • *
  •  9,208 9,208
  • Super Kitty
Re: Wanting to upgrade mach 3 to a newer version
« Reply #2 on: October 16, 2021, 01:52:50 AM »
You can download any of the available versions of Mach3 from the ftp downloads site;  https://www.machsupport.com/ftp/Mach3/

Tweakie.
PEACE

Offline Jackal

*
  •  171 171
Re: Wanting to upgrade mach 3 to a newer version
« Reply #3 on: October 16, 2021, 02:43:57 AM »
Tweakie,
Thanks  for that  info.
When I searched Google,  it just showed the latest version on several host sites.
Will let y'all  know how update goes.
Everything is bio-degradable if you run over it enough with a lawnmower.

Offline Tweakie.CNC

*
  • *
  •  9,208 9,208
  • Super Kitty
Re: Wanting to upgrade mach 3 to a newer version
« Reply #4 on: October 16, 2021, 03:35:39 AM »
I think you will find that Version R3.043.062 is the best one to use.

Tweakie.

PEACE

Offline Jackal

*
  •  171 171
Re: Wanting to upgrade mach 3 to a newer version
« Reply #5 on: October 16, 2021, 11:23:01 AM »
I think you will find that Version R3.043.062 is the best one to use.

Tweakie.



Thanks for that info. Much appreciated.👍👍👏👏💯
Everything is bio-degradable if you run over it enough with a lawnmower.