Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Jackal on October 14, 2021, 08:57:55 PM
-
My mill is using an older ( licensed) version of mach 3.
It seems that it's around a 2010-2011 year edition. At the time of my retrofit, it was the latest edition.
It the past there was a few problems where the spindle wouldn't reverse in auto tapping, etc.
What would be the latest upgrade that some of you would recommend?
Right now I don't have the info on the computer that is running the system.
That can be provided tomorrow if necessary.
Thanks in advance.
Jack
-
Any ideas where I can download a newer version? Not necessarily the newest, maybe something around 2013???
-
You can download any of the available versions of Mach3 from the ftp downloads site; https://www.machsupport.com/ftp/Mach3/
Tweakie.
-
Tweakie,
Thanks for that info.
When I searched Google, it just showed the latest version on several host sites.
Will let y'all know how update goes.
-
I think you will find that Version R3.043.062 is the best one to use.
Tweakie.
-
I think you will find that Version R3.043.062 is the best one to use.
Tweakie.
Thanks for that info. Much appreciated.👍👍👏👏💯