Hello Guest it is January 18, 2022, 09:34:43 PM

Author Topic: Speeding up text  (Read 2037 times)

0 Members and 1 Guest are viewing this topic.

Speeding up text
« on: October 16, 2007, 05:47:25 PM »
HI Gang,
I am preparing to do some 'embossed' lettering.
Trying out the code generated by LazyCam it takes a long time to cut because I am using a 1/16 cutter to get good definition of the letters.
However this means the larger areas between letters take a long time to cut.
The answer must be to use two different size cutters.
How do I go about achieving  this using LC.

I feel someone must have already solved  this problem.