Hello Guest it is March 28, 2024, 04:52:36 AM

Author Topic: Mach3 driver problem  (Read 2997 times)

0 Members and 1 Guest are viewing this topic.

Mach3 driver problem
« on: May 20, 2021, 03:45:35 PM »
I’m so confused so if I install mach3 on my pc (win xp) with the driver part my g code doesn’t loads but is not right in the tool path if I load it without the driver part it loads perfect but then can’t use the cnc 🤯🤯 I’m using a hobby cnc desktop with lpt port please help Iv tried lots of different g codes  :'( :'( :'( :'(

Offline ZASto

*
  •  423 423
    • View Profile
Re: Mach3 driver problem
« Reply #1 on: May 20, 2021, 05:09:49 PM »
Without a license, limit is 500 lines with driver loaded.
Without driver loaded Mach3 works in preview mode without generating movements.
So, no need to cry  8)
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.
Re: Mach3 driver problem
« Reply #2 on: May 20, 2021, 05:26:38 PM »
Yes I know that it’s defo not due to the limitations as I have uninstalled it and reinstalled without the driver and loads perfect but then the cnc will not drive
Re load it with the driver and the code not work right but I can get the cnc to move

Offline ZASto

*
  •  423 423
    • View Profile
Re: Mach3 driver problem
« Reply #3 on: May 20, 2021, 06:17:57 PM »
So you did not get it.
Without driver and without license Mach3 will load all G-code for preview - no motion of machine.
With driver and without license - 500 line limit
With driver and with license - almost no limit on G-code size
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.