Hello Guest it is January 22, 2022, 04:35:33 AM

Author Topic: Mach4-X3-HiCON.m4prof  (Read 237 times)

0 Members and 1 Guest are viewing this topic.

Offline Mauri

*
  •  327 327
    • View Profile
Mach4-X3-HiCON.m4prof
« on: April 14, 2021, 12:20:40 AM »
Steve, (smurph)
As requested the Mach4-X3-HiCON.m4prof is attached.
Regards,
Mauri

Offline Mauri

*
  •  327 327
    • View Profile
Re: Mach4-X3-HiCON.m4prof
« Reply #1 on: April 14, 2021, 04:41:51 PM »
Steve,
The file below has my Mach4 Input and Output Signal setting for HiCON.
These work just fine for example Mach4 V3804 the spindle starts just fine.
I have used the same settings on many Mach4 Programs for many years and have machined many carvings all without issue.
But now it will not start.
Regards,
Mauri.