Hey all, I have a problem with the lathe spindle speed. I set the rpm to 200 and the readout settles at 200 but the spindle is turning at about 380rpm. I've checked everything and can't find anything wrong.
Finally I tried another configuration file and it works ok, set at 200 and readout is 200rpm and spindle is now at 200rpm.
I have one pulse per rev on spindle.
So there is something in the config file wrong but I cannot figure out what it is.
Can someone help on what setting it could be that's doing it. Been trying for days now. This config is all set for my machine and I'd hate to start over again.
Thanks