Hello Experts,
I built a CNC-Plasma cutter which runs with Mach3.
I have a Problem with the Z-axis (Floating head), the z-axis is moving up higher after each cut, means after each cut the program has a new 0 for z-axis. (see attached drawing for better understanding). It has noting to do with noises form torch because it is the same behavior when torch is off.
In addition to that, it is not possible to use G31 for probing, because G92 did not set z to 0 after floating head switch is triggered.
I have the Feeling that these both Problems are linked anyhow.
I checked all the Settings in Mach3, if I missed something but I did not find anything.
Hopefully someone is able to help me to solve it.
Thanks!!