Hello Guest it is March 29, 2024, 07:53:15 AM

Author Topic: How can I make "Soft Limits on when Mach4 starts up"?  (Read 805 times)

0 Members and 1 Guest are viewing this topic.

How can I make "Soft Limits on when Mach4 starts up"?
« on: February 27, 2021, 01:26:46 AM »
Hello,

I've been struggling with soft limits.

Before I updated my Mach4, soft limits were on when Mach4 started up.
(Of course, I can click on the soft limit button and turn it off if I need it.)

I just want my recently updated Mach4 to work the same way.

What would be the simplest way to make it? ;)


P.S. Of course, I do "Axis referencing" before machining parts.

Offline Stuart

*
  •  311 311
    • View Profile
Re: How can I make "Soft Limits on when Mach4 starts up"?
« Reply #1 on: February 27, 2021, 02:48:28 AM »
try here
https://youtu.be/IXuuGRACU1I

its a mach4 video by mach4 Brianna
Re: How can I make "Soft Limits on when Mach4 starts up"?
« Reply #2 on: March 01, 2021, 01:12:05 AM »
try here
https://youtu.be/IXuuGRACU1I

its a mach4 video by mach4 Brianna


Thank you so much my SAVIOR! ;)
I made it!