Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: ysymidi on February 27, 2021, 01:26:46 AM

Title: How can I make "Soft Limits on when Mach4 starts up"?
Post by: ysymidi on February 27, 2021, 01:26:46 AM

Hello,

I've been struggling with soft limits.

Before I updated my Mach4, soft limits were on when Mach4 started up.
(Of course, I can click on the soft limit button and turn it off if I need it.)

I just want my recently updated Mach4 to work the same way.

What would be the simplest way to make it? ;)


P.S. Of course, I do "Axis referencing" before machining parts.

Title: Re: How can I make "Soft Limits on when Mach4 starts up"?
Post by: Stuart on February 27, 2021, 02:48:28 AM

try here
https://youtu.be/IXuuGRACU1I

its a mach4 video by mach4 Brianna

Title: Re: How can I make "Soft Limits on when Mach4 starts up"?
Post by: ysymidi on March 01, 2021, 01:12:05 AM

Quote from: Stuart on February 27, 2021, 02:48:28 AM

try here
https://youtu.be/IXuuGRACU1I

its a mach4 video by mach4 Brianna

Thank you so much my SAVIOR! ;)
I made it!