Hello Guest it is March 29, 2024, 07:06:16 AM

Author Topic: Mach3 intervals going 3x as far  (Read 595 times)

0 Members and 1 Guest are viewing this topic.

Mach3 intervals going 3x as far
« on: February 12, 2021, 10:05:17 AM »
Hey all, loving the community. I need help with what I hope is a simple solution. My machine is going 3x as far as my user interface is saying in the mach3 program. I would try to troubleshoot myself but I am very new to all this and don't want to screw something up. What would be the reason the machine is going 3x as far as the user interface is saying? For example, the machine moves 3 inches but the Mach3 user interface says it moved 1 inch. and its the same for x, y and z axis.

Thank you!
Ty

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Mach3 intervals going 3x as far
« Reply #1 on: February 12, 2021, 11:19:19 AM »
Config -> Motor Tuning -> Step's per for each axis

https://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_Install_Config.pdf

chapter 5.5 would be from interest

however the hole Manual might be interesting.
« Last Edit: February 12, 2021, 11:22:36 AM by TPS »
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.