Hello Guest it is May 12, 2021, 11:17:56 PM

Author Topic: Home/limits on same switch setup help.  (Read 136 times)

0 Members and 1 Guest are viewing this topic.

Home/limits on same switch setup help.
« on: January 25, 2021, 07:29:02 AM »
Been away from things for a while and can't get this to work.  I have 3 single switches at the positive extents of XYZ travel and want to use them as both home & limits along with soft limits.

I should be able to start Mach3, press Reset, press "Ref all home" and each axis moves until it bounces off its switch, right?  I've missed something silly in the setup somewhere.  Can one of you Gurus take a look at my .xml please?

edit: Oh yeah, all switches are NC and wired in series.
« Last Edit: January 25, 2021, 07:35:07 AM by DICKEYBIRD »
Milton from Tennessee ya'll.

Offline TPS

*
  •  2,129 2,129
    • View Profile
Re: Home/limits on same switch setup help.
« Reply #1 on: January 25, 2021, 09:41:49 AM »
you have to set the Enabled for each Input in Config->Ports&Pins-Input signals
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: Home/limits on same switch setup help.
« Reply #2 on: January 25, 2021, 10:19:17 AM »
Ouch! (Dope slapping myself) thanks! :-[
Milton from Tennessee ya'll.
Re: Home/limits on same switch setup help.
« Reply #3 on: January 25, 2021, 01:24:46 PM »
Thanks TPS, it all works perfectly now. :)
Milton from Tennessee ya'll.