Hello Guest it is January 15, 2021, 09:11:08 AM

Author Topic: Adding a second BOB  (Read 34 times)

0 Members and 1 Guest are viewing this topic.

Adding a second BOB
« on: January 03, 2021, 03:51:46 PM »
Hello All,

My Mill has a ESS connected a 5 Axis Breakout board (BOB) driving 4 motors and spindle. The ESS has 3 parallel ports and the first one is utilized by the current BOB. How do I configure MACH 3 to utilize the second BOB?

Any help would be greatly appreciated.

Happy Milling.