Hello Guest it is March 28, 2024, 10:55:32 AM

Author Topic: Spindle won't run  (Read 787 times)

0 Members and 1 Guest are viewing this topic.

Spindle won't run
« on: November 27, 2020, 07:59:32 PM »
 >:(  Have bought 6040est I have set it up and ran roadrunner test g code now the spindle won't run through the pc any thoughts?  Bruce

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Spindle won't run
« Reply #1 on: November 27, 2020, 08:03:50 PM »
Is it 0-10 volt analogue or just on/off by relay?
Without engineers the world stops
Re: Spindle won't run
« Reply #2 on: November 27, 2020, 08:49:21 PM »
Sorry bit above my pay grade Spindle runs through a VFD. I have set up Mach 3 as per chinese instructions and it seemed to be behaving itself. It finished off the roadrunner. Now I cannot set the spindle speed just zeros all the time

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Spindle won't run
« Reply #3 on: November 27, 2020, 08:54:10 PM »
We need more to work on, some pictures of the vfd, settings and the inputs/outputs will help
Without engineers the world stops