Hello Guest it is November 24, 2020, 03:05:45 PM

Author Topic: 4th axe on Fusion 360  (Read 193 times)

0 Members and 1 Guest are viewing this topic.

4th axe on Fusion 360
« on: November 06, 2020, 02:46:35 PM »
Hello everyone
I'm encountering a lots of problem using the 4th axe on my Bf20 using Fusion 360 post processor for Mach3. Does someone encountered this problem? Maybe Mach3 need some adjustment?
Thanks in advance

Offline Graham Waterworth

*
  • *
  •  2,218 2,218
  • Yorkshire Dales, England
    • View Profile
Re: 4th axe on Fusion 360
« Reply #1 on: November 07, 2020, 09:21:58 AM »
Not a single 4th axis move in the program so check your CAM settings.
Without engineers the world stops
Re: 4th axe on Fusion 360
« Reply #2 on: November 07, 2020, 11:25:13 AM »
Hi Graham...Please let me know how I have to do...because simulation is ok... I just obtained this program...

Offline Graham Waterworth

*
  • *
  •  2,218 2,218
  • Yorkshire Dales, England
    • View Profile
Re: 4th axe on Fusion 360
« Reply #3 on: November 07, 2020, 06:34:06 PM »
Its working on my Mach3, no idea if its what it should look like but that's all I can do.

Without engineers the world stops
Re: 4th axe on Fusion 360
« Reply #4 on: November 09, 2020, 01:22:50 PM »
Yes it is also on mine....but A axe doesn't move correctly...and tool never touch the material...exceeding my table geometry!!!! I need a right post processor...!