Hello Guest it is March 28, 2024, 02:08:44 PM

Author Topic: Help a newbie  (Read 992 times)

0 Members and 1 Guest are viewing this topic.

Help a newbie
« on: October 10, 2020, 10:39:31 AM »
Hello everybody, i just bought a 6040Z, this wonderful chinese machine comes with mach3, now, this program beats me, hard, i almost hate it, i couldn't find help anywhere else so i decided to make a post here.

My problems are:
the machine homes X and Y before Z, which caused me to brake a almost brand new end mill
the spindle speed max is defaulted to 8000 even though my spindle can do up to 24k

I only hope there's somebody here that can help me, cause i've spent two days already trying to figure it out and all i found was people having trouble setting their limit switches, which i dont (yet) have

Thank you.
Andrei
Re: Help a newbie
« Reply #1 on: October 10, 2020, 11:33:22 AM »
So, i managed to figure out how to toggle the spindle so that's fine now.
Re: Help a newbie
« Reply #2 on: October 10, 2020, 12:59:54 PM »
only 2 days?! ha ha.
i'm a newbie myself.
I suggest editing the macro that homes the machine, and switching the operation, so that the z homes first, or at least retracts all the way.
you might could try in the menu [operator]---[edit button script]---(select button for homing)
or see if you can find the macro in the mach3 macros folder.
about all I know, maybe it will get you started till someone more knowledgeable can post.
cheers,
mda
ddd llc
Re: Help a newbie
« Reply #3 on: October 10, 2020, 01:16:17 PM »
found the folder but i have no idea which one deals with the machine homing

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Help a newbie
« Reply #4 on: October 11, 2020, 04:40:37 AM »
first off all, you have to tell us how you start the homing.

by pressing Ref All Home button?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: Help a newbie
« Reply #5 on: November 01, 2020, 11:13:40 AM »
On mach3 Go to config
On global settings mark little square allow safe_z Moves
choose first round CHOOSE  safeZ DRO is in machine Cordinates
on Safe-z place a number where you want Z to be Before home OR STOP
in optional
choose goto safeZ when stop button is hit
 then press Ok