Hello Guest it is March 29, 2024, 08:51:54 AM

Author Topic: NEED HELP!!! Setting up Mach3 with Gecko G320X and servos for a 3-axis router?  (Read 1639 times)

0 Members and 1 Guest are viewing this topic.

2
Hope these help.

Offline TPS

*
  •  2,501 2,501
    • View Profile
thank you for the photos.

there is not much to find about this BOB/Controller on the Internet.

so one Chance is follow up the wiring.

Looks like that one of this terminal blocks is for each axis.
would be interesting where the  blue orange red green White wires are connected to the servo Controller.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Sorry, is the servo controller the same as the servo motors? I’ll get pics up on Monday!

Offline TPS

*
  •  2,501 2,501
    • View Profile
no i mean the wiring on the GEKO's
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.