Hello Guest it is September 28, 2021, 12:54:35 AM

Author Topic: mach3 text engraving issues  (Read 251 times)

0 Members and 1 Guest are viewing this topic.

mach3 text engraving issues
« on: September 09, 2020, 02:31:56 PM »
ive been using the text engraving wizard on mach 3 loader and its been working.
now when I set everything and type what I want engraved and hit cycle start it moves in the y axis where it needs to be then drops down past where I set my z and goes an inch or so into the board im engraving. any suggestions on what is wrong and how to fix it ?

Offline Tweakie.CNC

*
  • *
  •  8,807 8,807
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: mach3 text engraving issues
« Reply #1 on: September 10, 2020, 01:03:53 AM »
Could you perhaps attach your problem Gcode file.

Tweakie.
KEEP SAFE !
Re: mach3 text engraving issues
« Reply #2 on: September 10, 2020, 10:22:09 AM »
After re checking my settings probably 100 times I finally figured out the z top setting was wrong. but thanks for the reply