Hello Guest it is April 13, 2021, 11:35:32 AM

Author Topic: Mach4 Simple Auto z touch  (Read 189 times)

0 Members and 1 Guest are viewing this topic.

Mach4 Simple Auto z touch
« on: August 12, 2020, 05:06:02 AM »
I'm looking for a simple procedure to Auto zero my Z axis when an M6 tool change is executed.

My mach3 setup had an extra button on the screen for this.

Thanks

George
One step at a time!
Re: Mach4 Simple Auto z touch
« Reply #1 on: August 12, 2020, 09:58:19 AM »
just read the manual,there inside very clear change tool and very clear measure tool length procedure
you can do as boton,as m function....
and of course need add yours specific requirement
Re: Mach4 Simple Auto z touch
« Reply #2 on: August 12, 2020, 12:04:45 PM »
Thanks Katz, I didn't see that section in the config/installation guide. Point me in the right direction please.

Thanks

George
One step at a time!
Re: Mach4 Simple Auto z touch
« Reply #3 on: August 12, 2020, 08:12:38 PM »
lua scripting guide ,page 20-automatic tool height setting   page 22-tool change