Hello Guest it is October 27, 2021, 12:37:58 AM

Author Topic: Mach3 - jogging while reffering to machine coordinates?  (Read 293 times)

0 Members and 1 Guest are viewing this topic.

Mach3 - jogging while reffering to machine coordinates?
« on: July 28, 2020, 12:37:16 PM »
Hello

I have a question. I need my machine to go to lets say X400 and Y600 machine coordinates, but it reffers to its other coordinates (offset?). I used to MDI tab and command "G00 X400 Y600". Struggling with it overhere.

Re: Mach3 - jogging while reffering to machine coordinates?
« Reply #1 on: July 28, 2020, 12:51:08 PM »
lol nevermind

Calculated the offset its good now. If there's a better method to switch between offset coordinates and machine coordinates then I'd love to know that.

Offline ZASto

*
  •  387 387
    • View Profile
Re: Mach3 - jogging while reffering to machine coordinates?
« Reply #2 on: July 28, 2020, 02:42:55 PM »
Did you ever click on a button labeled "G-CODES"?

There you will find a meaning of G53  :)
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.