Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: JoonasM on July 28, 2020, 12:37:16 PM

Title: Mach3 - jogging while reffering to machine coordinates?
Post by: JoonasM on July 28, 2020, 12:37:16 PM

Hello

I have a question. I need my machine to go to lets say X400 and Y600 machine coordinates, but it reffers to its other coordinates (offset?). I used to MDI tab and command "G00 X400 Y600". Struggling with it overhere.

Title: Re: Mach3 - jogging while reffering to machine coordinates?
Post by: JoonasM on July 28, 2020, 12:51:08 PM

lol nevermind

Calculated the offset its good now. If there's a better method to switch between offset coordinates and machine coordinates then I'd love to know that.

Title: Re: Mach3 - jogging while reffering to machine coordinates?
Post by: ZASto on July 28, 2020, 02:42:55 PM

Did you ever click on a button labeled "G-CODES"?

There you will find a meaning of G53  :)