Hello Guest it is March 28, 2024, 03:44:03 PM

Author Topic: Loop-d-loop G41  (Read 1256 times)

0 Members and 1 Guest are viewing this topic.

Loop-d-loop G41
« on: May 14, 2020, 12:52:26 PM »
When I use a G41 to compensate, my radius cut goes crazy with another loop to prep for the next move. Between the G02 and the next G01 is where I get the circled prep move.

g41
g01 x.671 y-.0729
g02 x.8957 y-.333 r.282
g01 x1.2837 y-.33

ByrdMan
Re: Loop-d-loop G41
« Reply #1 on: June 01, 2020, 08:47:24 AM »
I am using Mach4 4.2.0.4300 Build 4300

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Loop-d-loop G41
« Reply #2 on: June 08, 2020, 08:34:54 PM »
Was the code written for G41 from the start or have you added it later?
Without engineers the world stops