Hello Guest it is November 27, 2021, 04:38:25 PM

Author Topic: jog in mach 3  (Read 306 times)

0 Members and 1 Guest are viewing this topic.

jog in mach 3
« on: April 22, 2020, 05:01:20 PM »
I'm not very proficient in mach 3 and need a refresher on how to jog my machine in mach 3 specific movements.  either say x 3 inches y 3 inches or also specific coordinates

Offline Tweakie.CNC

*
  • *
  •  8,863 8,863
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: jog in mach 3
« Reply #1 on: April 24, 2020, 03:41:07 AM »
You can download the Mach3 manual from here; https://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_1.84.pdf
Section 3.4 deals with MDI commands.
KEEP SAFE !
Re: jog in mach 3
« Reply #2 on: April 24, 2020, 08:08:14 AM »
Thanks very much.