Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Craig Brown on April 22, 2020, 05:01:20 PM

Title: jog in mach 3
Post by: Craig Brown on April 22, 2020, 05:01:20 PM

I'm not very proficient in mach 3 and need a refresher on how to jog my machine in mach 3 specific movements.  either say x 3 inches y 3 inches or also specific coordinates

Title: Re: jog in mach 3
Post by: Tweakie.CNC on April 24, 2020, 03:41:07 AM

You can download the Mach3 manual from here; https://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_1.84.pdf
Section 3.4 deals with MDI commands.

Title: Re: jog in mach 3
Post by: Craig Brown on April 24, 2020, 08:08:14 AM

Thanks very much.