Hello Guest it is April 13, 2021, 05:34:50 AM

Author Topic: signal inputs  (Read 183 times)

0 Members and 1 Guest are viewing this topic.

Offline moxy

*
  •  33 33
    • View Profile
signal inputs
« on: April 14, 2020, 05:10:54 PM »
Hi All, Years since I have been on the forum. I have an RNR motion controller that I'm using on my plasma machine and x,y,and z control is working ok. when running a gcode file the torch on triggers fine but the thc zup and zdown do nothing? I checked on the rnr board connectors and the relevant inputs are triggering ok but giving no z control. How do I assign an action to an input signal? Set thc ports to 3 and signals to 10 11 and 12 in  ports etc config file.
Re: signal inputs
« Reply #1 on: April 14, 2020, 05:19:59 PM »
Hi,
I don't think the RnR board supports THC.

Craig
My wife left with my best friend...
     and I miss him!