Hello Guest it is November 28, 2021, 01:24:10 PM

Author Topic: Deep cut trips the reset  (Read 2122 times)

0 Members and 1 Guest are viewing this topic.

Deep cut trips the reset
« on: September 21, 2007, 07:32:19 PM »
When I set my depth of cut anything over about .125 the machine tends to trip the reset.  I'm running the Xylotex system on a Sylsolva machine that I built. Anyone have any ideas?

vmax549

*
Re: Deep cut trips the reset
« Reply #1 on: September 23, 2007, 05:16:23 PM »
Try setting the debounce up to about 2000, you may have a vibration that is tripping a limit  switch. What does the error message say in the message box???