Hello Guest it is March 29, 2024, 03:50:50 AM

Author Topic: Feedrate over problem  (Read 2519 times)

0 Members and 1 Guest are viewing this topic.

yercik

*
Feedrate over problem
« on: September 17, 2007, 01:43:44 AM »
There is a bug with the FRO. When I change the FRO value (Ex: %150), the feedrate increases (not limited to maximum axis speed).

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Feedrate over problem
« Reply #1 on: September 17, 2007, 06:58:32 AM »
Have you tried to check the No FRO on Queue check box in general config. to see if that helps?

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!