Hello Guest it is September 25, 2020, 04:24:54 PM

Author Topic: 3rd axis on mach3 turn  (Read 198 times)

0 Members and 1 Guest are viewing this topic.

3rd axis on mach3 turn
« on: January 04, 2020, 05:23:01 AM »
hi
I want to fit a stepper to the tail-stock of my lathe
has there ever been a screen set with a 3rd axis on mach 3 turn ?
thank you
 Colin

Offline RICH

*
  • *
  •  7,412 7,412
    • View Profile
Re: 3rd axis on mach3 turn
« Reply #1 on: January 04, 2020, 08:04:06 AM »
Not posted that I can recall. You create custom one .
Link to a lathe screen set with three axes, X,Y,Z.

http://www.machsupport.com/forum/index.php/topic,13548.msg234493.html#msg234493

RICH
Re: 3rd axis on mach3 turn
« Reply #2 on: January 04, 2020, 10:01:00 AM »
many thanks Rich
have downloaded and got it on screen , just what I wanted will run it later
what a star you are Rich
thank you
Colin