Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: sircolin on January 04, 2020, 05:23:01 AM

Title: 3rd axis on mach3 turn
Post by: sircolin on January 04, 2020, 05:23:01 AM

hi
I want to fit a stepper to the tail-stock of my lathe
has there ever been a screen set with a 3rd axis on mach 3 turn ?
thank you
 Colin

Title: Re: 3rd axis on mach3 turn
Post by: RICH on January 04, 2020, 08:04:06 AM

Not posted that I can recall. You create custom one .
Link to a lathe screen set with three axes, X,Y,Z.

http://www.machsupport.com/forum/index.php/topic,13548.msg234493.html#msg234493

RICH

Title: Re: 3rd axis on mach3 turn
Post by: sircolin on January 04, 2020, 10:01:00 AM

many thanks Rich
have downloaded and got it on screen , just what I wanted will run it later
what a star you are Rich
thank you
Colin