Hello Guest it is December 08, 2021, 08:45:34 PM

Author Topic: Old Stuff: Mach 3 Tool Number DRO  (Read 1244 times)

0 Members and 1 Guest are viewing this topic.

Old Stuff: Mach 3 Tool Number DRO
« on: November 22, 2019, 07:14:55 PM »
I recently set up one of my machines tool tables with tool lengths. 

When I execute a tool change it updates the tool length offset and Z DRO, but the tool number DRO still reads zero. 

My typical tool change command is T(x) M6 G43 H(x) where (x) is the tool number.

I can manually enter a tool number into the DRO and it applies the tool offset from the tool table if it is not already applied from a command like the one above.   

I run into this same issue on both the machine where I have implemented the tool table, and on the test installation on my design computer.  I spent over an hour looking for a solution by searching the forum, but was unable to find anything. 

Is there some setting in Mach configuration I am missing or do I need to add something to my tool change macros or both? 


Re: Old Stuff: Mach 3 Tool Number DRO
« Reply #1 on: November 22, 2019, 07:41:20 PM »
I found somebody's tool change macro that has what I need in it. 

Quote
'Tool Change Macro For Manual tool change 09/14 CNC4XR7
'###############################################################
DoSpinStop()                     ' Make sure the spindle is OFF
Code"M09"                        ' Make sure the coolant is OFF
OldTool = GetOEMDRO (1224)  'Tool In spindle DRO You must add this to your settings screen
'x = GetToolChangeStart( 0 ) ' Get x tool change start position
'y = GetToolChangeStart( 1 ) ' Get y tool change start position
'z = GetToolChangeStart( 2 ) ' Get z tool change start position
tool = GetSelectedTool() ' tool to be changed to
NewTool = tool
If NewTool = OldTool Then 
        Exit Sub   
End If
Code "G53 G0 Z-1.0" ' Move z to tool change position in Machine cord.
While IsMoving ' wait for z to move
Wend
Call SetUserDRO (1224,NewTool)
SetCurrentTool( NewTool )  ' input new tool into tool in spindle dro
Code "G43 H" & tool        ' Call tool offsets for new tool
' Verify Tool Change Complete message box
Dim Msg, Style, Title, Help, Ctxt, Response,MyString
Msg = "Please Insert Tool  : " & "   (   "  & GetSelectedTool( ) & "   )   " & " " &  GetToolDesc(NewTool)
'Msg = "Please Insert Tool  Number " & " ( "  & GetSelectedTool() & " ) " & "    " & GetToolDesc(Tool) ' Define message
Style = vbYesNo + vbCritical + vbDefaultButton2   ' Define buttons
Style = 0 + 48 + 0   ' Define buttons.
Title = "Tool Change Requested"   ' Define title
Help = "DEMO.HLP"   ' Define Help file
Ctxt = 1000   ' Define topic       
 'context.       
 ' Display message.
Response = MsgBox(Msg, Style, Title, Help, Ctxt)
 If Response = vbOk Then   ' User chose Ok   
MyString = "Ok"   ' Perform some action
End If
'Show user the current tool description
Message "Tool  #   " & GetCurrentTool() & " :  " & GetToolDesc(GetCurrentTool) & "  Installed  " & "   Returning to Tool Change Start Position"
Code "G00 Z.25"
'Code "G00 X" & x  & "Y" & y & "Z" & z 'Move back to where the tool change was prompted
While IsMoving
Wend
End                         

His video is here: 
https://www.youtube.com/watch?v=26_N4uwRWmQ

He has a link in the description to a drop box with a screen set and the macro at dropbox.  I edited the my screenset instead. 
Re: Old Stuff: Mach 3 Tool Number DRO
« Reply #2 on: July 26, 2020, 05:58:48 AM »
Art soft is a website that has a division of solutions. They have a mach support Forum available for their Old Stuff to get 3 Tool Number DRO. You can check papers owl info that student who are searching writing techniques. You can easily get their tools to change numbers. Join their website for more information.