Hello Guest it is October 23, 2019, 05:57:18 PM

Author Topic: Extra turn wizards  (Read 10357 times)

0 Members and 1 Guest are viewing this topic.

Offline zarzul

*
  •  317 317
  • Wyoming, USA
    • View Profile
Extra turn wizards
« on: September 13, 2007, 02:33:25 PM »
I posted these in the VB & Wizard area before and thought they should be moved to here.


Unzip and put in Mach3\turnaddons\MY TURN 
Put the bitmaps in Mach3\turnaddons\MY TURN \bitmaps


Left taper to Face
Right taper to Face
Parabola - use with care
End Groove - for o-ring groove on the face
ID groove - for internal groove for o-ring or snap ring

Offline Chaoticone

*
  • *
  •  5,617 5,617
  • Precision Chaos
    • View Profile
Re: Extra turn wizards
« Reply #1 on: September 13, 2007, 03:04:33 PM »
Thanks for shareing.  :)

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Extra turn wizards
« Reply #2 on: February 13, 2015, 03:44:14 PM »
Thanks