Machsupport Forum

Support => Downloads => Others => Topic started by: zarzul on September 13, 2007, 02:33:25 PM

Title: Extra turn wizards
Post by: zarzul on September 13, 2007, 02:33:25 PM

I posted these in the VB & Wizard area before and thought they should be moved to here.


Unzip and put in Mach3\turnaddons\MY TURN 
Put the bitmaps in Mach3\turnaddons\MY TURN \bitmaps


Left taper to Face
Right taper to Face
Parabola - use with care
End Groove - for o-ring groove on the face
ID groove - for internal groove for o-ring or snap ring

Title: Re: Extra turn wizards
Post by: Chaoticone on September 13, 2007, 03:04:33 PM

Thanks for shareing.  :)

Brett

Title: Re: Extra turn wizards
Post by: Contract_Pilot on February 13, 2015, 03:44:14 PM

Thanks