Hello Guest it is May 14, 2021, 10:03:59 AM

Author Topic: STEPCRAFT Plugin  (Read 488 times)

0 Members and 1 Guest are viewing this topic.

STEPCRAFT Plugin
« on: September 18, 2019, 03:55:17 PM »
Hi evryone,
I have a stepcraft 420 router with diffrent application (printer extruder, milling, touchprobe and laser)
I am using UC100 controler and Mach3 as software but unfortunatly I did not find andy pligins for these application! I know that there are  (Stone.. from UK has -they are selling Mach3 with UC100 and stepcraft) but unfortunatly only in UK.)

How can I have this pligin to use stepcraft at fully potential!

Thank you :)

Offline BR549

*
  •  6,952 6,952
    • View Profile
Re: STEPCRAFT Plugin
« Reply #1 on: September 19, 2019, 08:14:26 AM »
You might start with emailing Stoney and asking them that question.

Just a thought, (;-) TP

Offline ZASto

*
  •  373 373
    • View Profile
Re: STEPCRAFT Plugin
« Reply #2 on: September 19, 2019, 10:13:00 AM »
What kind of plugin you need?

http://cncdrive.com/UC100.html

If you have UC100 plugin costs nothing, you just had to ask MrG(oogle) :)
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.
Re: STEPCRAFT Plugin
« Reply #3 on: September 19, 2019, 04:10:36 PM »
Hi,
maybe I did not put the right question! Is more about Mach 3 profile (I said plugin) for Laser engraveing, for 3d printer extruder and for 3d touchprobe of stepcraft.

Also I wrote to stoney but now answer.

Offline Tweakie.CNC

*
  • *
  •  8,706 8,706
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: STEPCRAFT Plugin
« Reply #4 on: September 20, 2019, 02:14:43 AM »
It is doubtful you will ever get a reply from Stoney.

Do you have your laser working (ON/OFF) with your existing Stepcraft Mach3 plugin ?
KEEP SAFE !
Re: STEPCRAFT Plugin
« Reply #5 on: September 22, 2019, 08:12:11 AM »
You have right!
From Stoney the answer  was that they have support but only for the machines bought from them!
Whatever!
I will tray to make a copy set-up from UCCNC but I thought there are someone on  the forum which is using stepcraft with UC100 and Mach3 and can help me!