The Xminus DRO works just fine for me. It is is DRO1101, do you have 1101 used in a macropump?
I will add a Z feedrate DRO and use it with the Zstep button.
I also cannot make an entry in the Zrapid DRO- its DRO1100, that should be valid and I don't have a macropump running. Ill have to look at that, maybe its a problem for Art. I wonder if DRO1100 has been used in some other function? maybe the Shuttle? I know this worked with earlier Mach versions, I tested it well.
I also found I cannot set the Zup for Rapid Button. That uses LED1100. Something has changed in Mach.
I will add a DRO for setting speed, but I wont be able to test it since I dont have a machine with a controlable spindle speed. Of course all it will do is issue a S#### g code.
I have figured out another problem that has bothered some guys- I viewed this as a Power Feed of the TABLE, so the feed buttons work in the sense of moving the table. Of course anyone doing CNC is used to moving the TOOL, so these values seem backward. However, since I think most users of this wizard will be used to the idea of a power feed option on a manual mill I will leave this as it is.
I will get a version with these fixes here in a day or two.