Hello Guest it is March 28, 2024, 04:41:26 AM

Author Topic: How many installations of MAch4 hobby can I have  (Read 1083 times)

0 Members and 1 Guest are viewing this topic.

How many installations of MAch4 hobby can I have
« on: August 01, 2019, 06:57:20 AM »
I would like to install Mach4 hobby License file on anther machine. How many installs are allowed. Do I need another PCID ??
One step at a time!
Re: How many installations of MAch4 hobby can I have
« Reply #1 on: August 01, 2019, 07:02:59 AM »
Hi,
you may have up to five machines, each will have its unique PCID.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'
Re: How many installations of MAch4 hobby can I have
« Reply #2 on: August 01, 2019, 07:14:00 AM »
Thanks Craig, but how do I get another PCID and Liscene file ?
One step at a time!
Re: How many installations of MAch4 hobby can I have
« Reply #3 on: August 01, 2019, 08:01:38 AM »
Hi,
log on to the NFS site and go to 'self managed licence' section.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'
Re: How many installations of MAch4 hobby can I have
« Reply #4 on: August 01, 2019, 02:01:01 PM »
Thanks Craig, all set up now!
Now I am ready to connect my Warp9 ESS.
I have opted to stay with my C11 board and will maybe add an addition Break out Board for the extra i/o's
Am I correct in saying I can copy all my motor ports and pins from Mach3 and add them in to my Mach4 setup ?
One step at a time!
Re: How many installations of MAch4 hobby can I have
« Reply #5 on: August 01, 2019, 02:58:47 PM »
Hi,

Quote
Am I correct in saying I can copy all my motor ports and pins from Mach3 and add them in to my Mach4 setup ?

That is substantially correct. Set up the pins in the ESS/Pins Config tab, then assign the pins on the ESS/Outputs tab.
Note the ESS plugin automatically updates the Mach Control plugin, it should not be necessary to make the settings in both,
just the ESS plugin.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'