Hello Guest it is February 03, 2026, 12:34:03 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Dogbone corners  (Read 4171 times)

0 Members and 2 Guests are viewing this topic.

Offline JHSRobo

*
  • 12 12
Dogbone corners
« on: July 25, 2019, 12:57:55 AM »
Is there and option in Mach to dogbone internal corners?

Thanks

Jay
Logged

Offline ZASto

*
  • 430 430
Re: Dogbone corners
« Reply #1 on: July 25, 2019, 01:29:46 AM »
Mach3 is strictly machine controller not a CAD/CAM software.
Vectric Aspire has dogbone tool. So, you create dogbones in CAD software. Mach will happily cut them after generating G-code in CAM.
Logged
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.
Pages: 1   Go Up
« previous next »