Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: JHSRobo on July 25, 2019, 01:57:55 AM

Title: Dogbone corners
Post by: JHSRobo on July 25, 2019, 01:57:55 AM

Is there and option in Mach to dogbone internal corners?

Thanks

Jay

Title: Re: Dogbone corners
Post by: ZASto on July 25, 2019, 02:29:46 AM

Mach3 is strictly machine controller not a CAD/CAM software.
Vectric Aspire has dogbone tool. So, you create dogbones in CAD software. Mach will happily cut them after generating G-code in CAM.