Hello Guest it is April 20, 2024, 08:58:53 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Mach 3 configuration soft limits  (Read 1086 times)

0 Members and 1 Guest are viewing this topic.

Offline samcheri

*
  • 12 12
    • View Profile
Mach 3 configuration soft limits
« on: July 19, 2019, 07:09:24 PM »
When you configure Mach 3 do the soft limits  indicate the actual work area of your table?
Logged

Offline joeaverage

*
  • 7,575 7,575
    • View Profile
Re: Mach 3 configuration soft limits
« Reply #1 on: July 21, 2019, 02:43:02 PM »
Hj,
yes, it is common to have the soft limits be the maximum work envelope.

Note that Soft Limits only make sense if your machine is Homed (or Referenced), ie you have home switches configured
and use them.

Craig

Logged
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'

Offline samcheri

*
  • 12 12
    • View Profile
Re: Mach 3 configuration soft limits
« Reply #2 on: July 21, 2019, 02:58:32 PM »
Thank you
Logged

Offline Overloaded

*
  • *
  • 4,922 4,922
    • View Profile
Re: Mach 3 configuration soft limits
« Reply #3 on: July 21, 2019, 04:27:45 PM »
Quote from: joeaverage on July 21, 2019, 02:43:02 PM


Note that Soft Limits only make sense if your machine is Homed (or Referenced), ie you have home switches configured
and use them.

Craig

Or, visual reference marks on each axis and Home in place. With, or without a Home Off value.
I used it this way for a while in the beginning.
Logged
Pages: 1   Go Up
« previous next »