Hello Guest it is March 29, 2024, 02:56:21 AM

Author Topic: "index distance not in allowed range" message  (Read 1029 times)

0 Members and 2 Guests are viewing this topic.

"index distance not in allowed range" message
« on: July 12, 2019, 11:34:06 AM »
Hi there,

can anyone enlighten me whether the magic number in Mach3, indicating minimum distance b/w Home switch
and encoder Index mark can be adjusted? For my rotary table i've found i cannot move them closer
then 15 degrees to avoid distance range error. I think it's too far.

thanks!

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: "index distance not in allowed range" message
« Reply #1 on: July 12, 2019, 01:53:39 PM »
indexed homing sounds like external Motion Controller, in the plugin config maybe?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: "index distance not in allowed range" message
« Reply #2 on: July 12, 2019, 05:22:16 PM »
yes, that's it! I was silly enough not to browse CSMIO_IP_A_plugin.dll with a text editor!
Then I should re-address the question to SC-lab stuff.

Thanks a lot!