Hello Guest it is September 20, 2021, 06:38:36 AM

Author Topic: Demo  (Read 2423 times)

0 Members and 1 Guest are viewing this topic.

Offline Wayne

  •  10 10
    • View Profile
« on: August 31, 2007, 10:26:41 PM »
I am ordering my license for Mach3 but haven't got it done yet. When using the demo version I can't get any outputs to light in the diagnostic screen. aka step/ dir  for any axis.  I got my Campbell iso board and have everything hooked up to my Gecko 201s but nothing moves.  DRO axis position works with a program or with jogging.  Also the led on output 4 on the isolation board is supposed to light when Mach 3 is up and running. It does not light.  Is this a disable function on the demo or do I have something setup wrong ?

Mach 3 newbie

Offline jimpinder

  •  1,232 1,232
  • Wakefield, West Yorks, UK
    • View Profile
Re: Demo
« Reply #1 on: September 01, 2007, 04:05:31 AM »
You must have something wrong -

I only use the downloaded version - and everthing is fully functioning.
Not me driving the engine - I'm better looking.