Hello Guest it is March 29, 2024, 07:00:10 AM

Author Topic: MB3, The new ESS breakout board  (Read 10516 times)

0 Members and 1 Guest are viewing this topic.

MB3, The new ESS breakout board
« on: April 25, 2019, 07:44:17 AM »
The new MB3 is the continued development of the MB series of breakout boards.  It keeps the best features of its predecessors MB1 and MB2 and in addition allows all isolated inputs be used in both NPN or PNP mode and also to operate with either 5V or 24V. In this new design, the ESS board can be directly plugged into the MB3 without using ribbon cables. This makes the ESS easier to install and reduces the distance the signals must travel. It eliminates a number of contact points, as well as inductance and resistance between the ESS and MB3 board.
  • Runs on Mach3 / Mach4 with Windows XP, Win7, Win8 and Windows10 both 32 and 64 bit, on both desktop and notebook computers.
  • New! Utilizes All 3 ports of the ESS.
https://www.cncroom.com/interface-cards/ess-mb3
https://www.cncroom.com/interface-cards/mb3

 

<a href="https://www.youtube.com/v/pGaCyydRLCw" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">https://www.youtube.com/v/pGaCyydRLCw</a>
The CNCRoom.com, the place where Industrial Hobbyists can talk and trade!
www.cncroom.com/forum