Hi all
I've done a search but didn't find an answer to the following questions.
I've converted my rotary table to stepper control, it's all setup in Mach 90:1 worm, 16 microsteps = 800 steps per Degree. Axis A setup as rotary, not sure about the degree box being ticked.
I'm having a problem with soft limits stopping the table and can't find how to disable them for the A axis, is it possible or does the degree box do this or do I just set the limit to 999999 (or whatever the limit is)
Also when using the rotary axis what does the F word do, does it set degrees or mm (tied in with the work peice dia setting)
thanks
Steve