Hello Guest it is November 12, 2019, 12:36:16 AM

Author Topic: changing mach from inches to run a gcode output in mm  (Read 248 times)

0 Members and 1 Guest are viewing this topic.

Re: changing mach from inches to run a gcode output in mm
« Reply #10 on: April 15, 2019, 04:23:37 PM »
or if its output from the cam as mm and in the gcode its already set to g21...then just leave that and mach (set in inches) will be fine....???
Re: changing mach from inches to run a gcode output in mm
« Reply #11 on: April 15, 2019, 04:28:52 PM »
Hi,
yep.  :D

Craig
My wife left with my best friend...
     and I miss him!