Hello Guest it is March 28, 2024, 03:45:04 PM

Author Topic: changing mach from inches to run a gcode output in mm  (Read 2781 times)

0 Members and 1 Guest are viewing this topic.

Re: changing mach from inches to run a gcode output in mm
« Reply #10 on: April 15, 2019, 04:23:37 PM »
or if its output from the cam as mm and in the gcode its already set to g21...then just leave that and mach (set in inches) will be fine....???
Re: changing mach from inches to run a gcode output in mm
« Reply #11 on: April 15, 2019, 04:28:52 PM »
Hi,
yep.  :D

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'