Hello Guest it is September 17, 2019, 07:29:10 AM

Author Topic: Spring coiling machine Mach3 User GUI interface  (Read 127 times)

0 Members and 1 Guest are viewing this topic.

Spring coiling machine Mach3 User GUI interface
« on: April 10, 2019, 04:54:14 AM »
Hi All
Can anyone offer complex programming services to make a GUI interface to adjust the G code parameters on our spring coiling machine.
The G code is currently adjusted in excel, however we want to develop this further to have the underlying G code controlled by the GUI user interface.
There are about 7 axis or control parameters and multiple equations and interconnected parameters.

Please inbox me if you have experience of this application or if you can offer this service: dac@springmaster.co.za
Re: Spring coiling machine Mach3 User GUI interface
« Reply #1 on: April 10, 2019, 05:02:49 PM »
Hi,
sounds like an interesting project.

I would use Mach4, Lua and wxLua, the combination being more capable and flexible than Mach3 and VB.

Craig
My wife left with my best friend...
     and I miss him!