Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Adriandacosta on April 10, 2019, 04:54:14 AM
-
Hi All
Can anyone offer complex programming services to make a GUI interface to adjust the G code parameters on our spring coiling machine.
The G code is currently adjusted in excel, however we want to develop this further to have the underlying G code controlled by the GUI user interface.
There are about 7 axis or control parameters and multiple equations and interconnected parameters.
Please inbox me if you have experience of this application or if you can offer this service: dac@springmaster.co.za
-
Hi,
sounds like an interesting project.
I would use Mach4, Lua and wxLua, the combination being more capable and flexible than Mach3 and VB.
Craig