I haven’t installed the Pokeys57E plugin yet because I don’t have the device yet. Will the plugin show the Pokeys registers in the Mach4 Register Diagnostics? Like this picture below.
If so I assume I could get and set the value of the Pokeys pin with code like this:
function GetRegister(regname)
local inst = mc.mcGetInstance()
local hreg = mc.mcRegGetHandle(inst,string.format("iRegs0/%s", regname))
return mc.mcRegGetValueString(hreg)
end
--add TB 01-09-18 add Pirce Delay Register value
local inst = mc.mcGetInstance()
local val = mc.mcProfileGetString (inst, "Registers", "PierceDelay" , "nf")
local hreg = mc.mcRegGetHandle (inst, "iregs0/PierceDelay" )
mc.mcRegSetValueString(hreg, val)
--end add
Will changing the pin value change the pin state?